Simpson Strong-Tie

GH46-8 Girder Hanger

SKU: SIMPGH468 | Model Number: GH46-8

Description

Simpson Strong-Tie GH46-8 Girder Hanger 2x Mudsill, 5 in. x 5 in. x 5 in. The Simpson Strong-Tie GH46-8 Girder Hanger is designed for girder-to-foundation wall connections, featuring a top-flange design. It is finished with gray primer and is made to accommodate 4x6 girders with an 8-1/16" saddle width. The hanger requires four 0.162" x 3 1/2" nails for installation and allows for skewing up to 45° with a bevel cut. It has dimensions of 5 in. x 5 in. x 5 in. and weighs 2.97 lbs.

Features

  • Use all specified fasteners for installation.
  • Insert four 0.162" x 3 1/2" nails into the girder.
  • Ensure 1 1/2" clearance hole accommodates rebar or anchor if required.
  • GH hangers may be skewed to a maximum of 45° with a bevel cut required.
  • The allowable loads are 100% of the table load.

⚠️ WARNING: This product can expose you to a chemical known to the State of California to cause cancer and Toluene known to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Product Specifications

Dimensions

5 × 5 × 5 in

Finish

Gray Primer

Weight

2.97 lbs