Simpson Strong-Tie
EPB44 Elevation Post Base
SKU: SIMPEPB44 | Model Number: EPB44

Description
Simpson Strong-Tie EPB44-12 Elevated Post Base 4 x 4 in. The Simpson EPB44-12 Elevated Post Base is designed for 4 x 4 in posts and crafted from durable 12 gauge steel with a gray paint finish. It provides a secure connection to concrete with a code-required 1 in stand-off to help prevent rot at the post end, allowing for up to 2-1/2 in of stand-off above concrete if desired. This post base is suitable for cast-in-place installations and is not recommended for non top-supported applications.
Features
- Install in wet concrete for secure placement.
- Provides the code-required 1 in stand-off to help prevent rot.
- Allows up to 2.5 in of stand-off above concrete if desired.
- Not recommended for non top-supported installations such as fences.
- Features a durable gray paint finish for added protection.
⚠️ WARNING: This product can expose you to a chemical known to the State of California to cause cancer and Toluene known to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Product Specifications
Color | Gray |
Length | 3.25 in |
Material | Steel |
Material Gauge | 12 ga |
Post Size | 4 x 4 in |
Weight Capacity | 3465 lb Down, 695 lb Cracked Uplift, 995 lb Uncracked |
Width | 3.5625 in |
